<div id="GreenPageHeaders"><h2>Metal & Standing Seam Roofing</h2></div>
Metal & Standing Seam Roofing

We take pride in providing “old world” custom fabrication and our ability to design right on site allows for a unique look at a lower cost.

Waccabuc, NY

A 6,300 square foot installation of Englert 24 gauge steel standing seam in matte black.

Easton, CT

24 gauge Kynar 500 standing seam steel by Englert, painted Matte Black. This job also used S5 clips as the solar panel anchoring system.

North Haven, CT

Englert 1300 steel standing seam in mansard brown, installed over 7.1″ of polyisocyanate rigid foam insulation.

Portland, CT

Englert 24 gauge steel standing seam in Sierra Tan, installed over 4″ of Firestone polyisocyanurate insulation.

Connecticut Roofcrafters has installed a variety of metal roofing systems on commercial and residential buildings for the past 20+ years. We employ expert metal roofing fabricators and installers well versed in the leading industry products.

We do all phases of metal roofing work, from tear-off and repairs to carpentry and reinstallation. We are available to work directly with homeowners, no general contractor is needed. We take pride in providing “old world” custom fabrication and our ability to design right on site allows for a unique look at a lower cost. Our process involves bringing the sheet metal shop to your jobsite which means: Straight Panels, Radius, Tapered, No damage from shipping, Less materials waste, and In-progress changes that are easily accommodated.

COPPER Metal Roofing Systems
A copper roof is a distinctive roof! It adds greatly to the resale value of your property. At approximately 144 pounds per square, Copper is lightweight which means less structural reinforcement is needed for the roof. Compare this to 350-750 lbs. per square from many other roofing materials.

Copper is affordable when compared to materials such as slate, tile, or cedar. When you compare the lifetime costs of a copper roof it is one of the least expensive materials available. A copper roof installed by Connecticut Roofcrafters should last well over 100 years! It is environmentally friendly and can achieve a class “A” fire rating.

Patina change refers to the tarnish that forms on the surface of copper, as a result of age and exposure; the rate of patina change is dependent on your climate. It gives copper that unique green look, and it also provides a protective layer that would otherwise cause it to be damaged by weathering. This example of patina change from 1-11 years is for a seaside environment. A roof inland could take 3 times longer to achieve the green-like color. However, copper can be treated to accelerate the patina process. It depends on the client’s preference.

Copper can be used for both residential and commercial buildings to give a distinct look. The possibilities are endless!

STEEL Metal Roofing Systems
It is the strongest standing seam roof and is highly wind and hail resistant. It is lightweight at 1.45 pounds per square foot. Steel is class “A” fire rated. The average steel roof by Connecticut Roofcrafters will last 50 years. You can choose from 30 colors. Use one color or combine several for a unique look!

ALUMINUM Metal Roofing Systems
The lightest of all metal materials, Aluminum is less expensive and a good alternative to copper, costing about 60-65% of a copper roof. It’s great for a salt-air environment, as it does not rust. An aluminum roof will last 50 years when installed by Connecticut Roofcrafters. There are 20 great colors to choose from or combine for an architecturally custom look!

ZINC Metal Roofing Systems
Zinc is for the customer who wants a distinctive look in a variety of natural colors. Roofing is maintenance-free and will last up to 100 years. Connecticut Roofcrafters is certified in Zinc work.

Contact us directly to discuss your metal or standing-seam roofing needs: Toll Free (888) 612-0798 or via email.